This list of the best sliding door companies in Singapore covers ten suppliers across HDB, condo and landed projects. The best sliding door singapore for most HDB owners is Lian Hup Seng Aluminium. Condo owners who want a minimal glass partition should call Sunflex. Rinro Singapore takes the top pick for a concealed pocket system that disappears into the wall, but it needs planning during renovation. The Door Boutique suits buyers who want to touch finishes before ordering. Confirm your opening, track type and glass safety before signing any sliding door installation Singapore quote.
Start With the Wall, Not the Door
Many Singapore homeowners assume a sliding door is just a panel on a track, so any contractor can install one. That belief causes most of the trouble: a top-hung track screwed into a false ceiling that cannot carry the load, a tempered glass panel without markings, or an HDB bedroom opening widened before checking the renovation rules. A sliding door in Singapore depends more on the wall and ceiling above it than on the door leaf itself.
I started looking for a sliding door for a four-room BTO in Tampines. The plan was a black aluminium frame for the kitchen. After measuring the opening, I found the existing beam meant a top-hung track needed a plywood backing plate. I spent a few weeks reading reviews, visiting showrooms and comparing carpenters. That process showed me the best sliding door Singapore lists are useful only after you understand your ceiling, floor and approval route. For wider reading, the home renovation category helped me place the door within the larger renovation sequence. You also need to decide whether the door must disappear into a pocket, run on a visible track, or become a glass partition. Those choices change the budget and the wall works.
Quick Picks for Different Singapore Homes
For top sliding door Singapore work in a normal HDB flat, Lian Hup Seng Aluminium is the practical first stop. Choose Rinro Singapore if you want a concealed pocket door that saves floor space and you are already doing wall works. Choose Sunflex for a slim glass partition between living areas, but only after a ceiling check. Choose The Door Boutique if you want a showroom visit before committing to any finish. Häfele is recommended when your carpenter has the skill and you only need the hardware.
Best Sliding Door Singapore: Comparison Table
The table below lines up ten companies across the same four facts. Price bands are not published by most suppliers, so treat them as a starting point and ask for an itemised quote after a site visit.
| Business | Best for | Price band | Area |
|---|---|---|---|
| Lian Hup Seng Aluminium Pte Ltd | Straightforward aluminium sliding doors for HDB apartments and condos | Not stated | Not stated |
| Sunflex | Glass partitions between living areas | Not stated | Not stated |
| The Door Boutique | Homeowners who want to see and touch door materials | Not stated | Not stated |
| Rinro Singapore (Eclisse) | Condos where every square foot counts | Not stated | Not stated |
| Häfele Singapore | Homeowners who already have a carpenter or interior designer | Not stated | Not stated |
| Aluflam Pte Ltd | Landed properties and larger condo renovations | Not stated | Not stated |
| Schüco Singapore | High-end condos and landed homes | Not stated | Not stated |
| Wintech Facade Engineering | Architect-driven condo and landed renovations | Not stated | Not stated |
| Glassworks Singapore | Bespoke glass sliding door panels | Not stated | Not stated |
| Atick Door Systems | Wider openings, disabled-friendly homes and high-traffic entrances | Not stated | Not stated |
The 10 Companies Singapore Homeowners Should Call
1. Lian Hup Seng Aluminium Pte Ltd
Lian Hup Seng is a local aluminium fabricator that has built a name around replacement windows and doors for HDB flats and older condos. The company makes and supplies aluminium sliding doors in standard profiles, which matters when a BTO or resale flat has a common door size and you do not want a custom joinery bill. Site measurement and fabrication are handled in-house, which can shorten the timeline for straightforward replacements. This is the low-friction route when the opening is unchanged and the old frame is being swapped like for like. For BTO owners, the renovating an HDB BTO flat guide sets out the wall work order.
What’s good
- Local fabrication base means standard HDB door sizes are familiar.
- Good option for standard aluminium profiles without custom joinery markups.
- Can handle replacement sets for older condos where the existing track has worn out.
- Familiar with common HDB window and door replacements.
What to watch
- Confirm whether the quote includes site installation or supply only.
- Custom powder-coated colours can add lead time.
Who it suits: HDB owners who want a functional aluminium sliding door and already know their opening size. Those chasing a designer glass partition should look elsewhere.
Price: Not stated
Details: Lian Hup Seng Aluminium Pte Ltd
2. Sunflex
Sunflex supplies frameless tempered glass sliding systems for internal partitions and balcony openings. The slim aluminium profiles and top-hung movement give a clean, minimal look that suits condos with open-plan living areas. If you want a run of glass panels between the living room and balcony, Sunflex is one of the more recognisable names for that sort of work. The panels are usually tempered or laminated, and the track sits at the top for a cleaner floor line. In an open-concept condo, this type of door keeps sightlines long instead of chopping the room into boxes.
What’s good
- Slim profiles keep the sightline minimal.
- Top-hung operation reduces floor track build-up in wet areas.
- Laminated or tinted glass options for privacy and safety.
What to watch
- Not a budget option once you add large panels and site reinforcement.
- Large panels need adequate support at the top, so check the wall head first.
- Confirm whether the wall can take the load before ordering.
Who it suits: Condo owners who want a glass partition and are prepared to open up the ceiling area for reinforcement. HDB owners on a tight budget should start with standard aluminium doors.
Price: Not stated
Details: Sunflex
3. The Door Boutique
The Door Boutique is an interior door supplier with a showroom, which solves a real problem in Singapore: many door decisions are made from a small sample while standing in a renovation contractor’s office. Here you can walk through hinged, barn, pocket and sliding door options, feel the track movement and compare finishes next to one another. That is useful for sliding doors because track quality and edge finishes are hard to judge online. You can also match the door against saved top 10 HDB interior design ideas before paying for a single leaf.
What’s good
- Wide range of finishes and styles under one roof.
- Showroom lets you slide the door and test track movement.
- Good for buying multiple internal doors at once.
- Staff can match door frames and hardware.
What to watch
- Sliding door range may sit behind the main hinged selection, so check stock.
- Installation may be done by a separate contractor, which means more coordination.
Who it suits: Homeowners who want to see and touch materials before deciding, especially for bedroom or wardrobe doors. Buyers who want a single company to handle complex glass systems should look at Sunflex or Rinro.
Price: Not stated
Details: The Door Boutique
4. Rinro Singapore (Eclisse)
Rinro Singapore supplies Eclisse pocket door systems. The door slides completely into a wall cavity, leaving no visible track and no door leaf when open. In a small condo, this frees up the arc of floor space that a hinged door usually steals. The catch is that the wall must be built or thickened to create the pocket, so it works best during a major renovation rather than as a last-minute add-on. For an open-concept layout, a pocket door disappears entirely and keeps the wall line clean.
What’s good
- Concealed pocket operation keeps the wall line clean when open.
- Can take timber, glass and laminate door leaves.
- Saves floor space in tight bedrooms and bathrooms.
- Hardware is designed for repeated daily use.
What to watch
- Requires a thicker wall or a false wall, which adds carpentry cost.
- Must be planned during construction or major renovation, not retrofitted into a finished wall.
Who it suits: Condo owners who value every square foot and are already redoing walls. HDB resale buyers planning a simple door swap should use a standard sliding door instead.
Price: Not stated
Details: Rinro Singapore (Eclisse)
5. Häfele Singapore
Häfele is not a door installer. The company sells the hardware that sits behind sliding doors: rollers, top-hung tracks, bottom guides, handles and soft-close dampers. That distinction matters. A cheap track from a non-specialist supplier may feel smooth in the showroom but fail after months of Singapore humidity. Häfele’s range and replacement parts are easier to source, and its technical team helps carpenters spec the right load-rated hardware. If your carpenter is good but cannot recommend a track, this is where you buy the parts.
What’s good
- Wide choice of certified sliding door hardware.
- Replacement parts are easier to find later.
- Technical advice for custom joinery and cabinet doors.
- Soft-close dampers and guides for heavier panels.
What to watch
- You still need a carpenter to build the door slab and frame.
- Final smoothness depends heavily on installation accuracy.
Who it suits: Homeowners who already have a carpenter or interior designer and want reliable sliding hardware. Those who want a one-stop door supply and install should look elsewhere.
Price: Not stated
Details: Häfele Singapore
https://www.hafele.com.sg
6. Aluflam Pte Ltd
Aluflam builds high-performance aluminium door and window systems, including fire-rated and large-format glazing. The company is not a retail shopfront for a single bedroom door. It is better understood as a specialist for landed properties and larger condo renovations where the aluminium sections need to carry heavy glass and meet stricter engineering standards. If your opening is unusually wide or faces strong wind exposure, that level of fabrication matters. For a simple three-foot kitchen door in an HDB flat, this is likely more engineering than the job needs.
What’s good
- Strong engineering background for heavy aluminium sections.
- Documented testing for some fire-rated and high-performance systems.
- Suitable for large openings and landed property facades.
- Strong aluminium profiles resist movement from wind and heavy use.
What to watch
- Company scope skews towards bigger projects, so a simple HDB door may be too small for their workflow.
- More than a standard HDB sliding door needs, both in cost and lead time.
- Lead times run longer because each frame is fabricated to the project.
Who it suits: Landed property owners and condo residents with oversized glazing. HDB homeowners replacing a three-panel bedroom sliding door should use a simpler fabricator.
Price: Not stated
Details: Aluflam Pte Ltd
7. Schüco Singapore
Schüco is an international window and door system brand with a Singapore presence. Their aluminium sliding systems appear on many premium residential towers, especially where slim sightlines and repeated daily use are written into the design brief. The tracks and rollers are engineered to handle double-glazed panels and full-height doors without sagging. You usually buy through certified fabricators rather than a direct retail counter, so the final result depends on who cuts and installs the aluminium.
What’s good
- Precise engineering for heavy doors.
- Good gaskets and weather sealing for balcony openings.
- Strong track and roller design for frequent use.
What to watch
- Premium pricing compared with local aluminium fabricators.
- Usually supplied through certified fabricators, so your installer’s skill still matters.
Who it suits: High-end condos and landed homes that need thermal performance and multiple locking points. Budget HDB projects should not start here.
Price: Not stated
Details: Schüco Singapore
8. Wintech Facade Engineering
Wintech Facade Engineering handles bespoke window and door systems for building envelopes. Their work involves complex glazing layouts, custom profiles and design support for architects. For a standard HDB sliding door, they are the wrong call. For a condo or landed project with an unusual opening, a structural steel edge or a glass wall that moves, a facade engineer is the right kind of supplier. You would bring them in when the door is part of the external wall rather than a loose internal partition.
What’s good
- Design support for complex conditions.
- Experience with large glazed openings and custom profiles.
- Works well with architect drawings and structural calculations.
What to watch
- Likely project based rather than a one-room installation.
- Not ideal for a single bedroom partition or simple HDB door replacement.
- Cost can climb when custom dies and testing are required.
Who it suits: Architect-driven condo and landed renovations with unusual door dimensions. HDB owners with a standard three-foot opening should use a local fabricator.
Price: Not stated
Details: Wintech Facade Engineering
9. Glassworks Singapore
Glassworks Singapore is a glass fabrication workshop. It cuts, polishes and tempers glass panels for shower screens, partitions and sliding door leaves. You would use this company when you already have a track system or a contractor ready to install, but you need a custom glass panel to a specific size. The workshop can also supply laminated safety glass, which is often required for partitions near walkways. Local fabrication turnaround helps when the opening is not a standard size and you cannot wait for an imported panel.
What’s good
- Custom sizing for non-standard openings.
- Laminated safety glass options.
- Local fabrication turnaround can reduce waiting time.
- Can match glass tint or finish to existing panels.
What to watch
- May not supply the track system, so you need another supplier for hardware.
- Installation quality depends on who fixes the track.
Who it suits: Bespoke glass sliding door panels for homeowners with a contractor already on site. Buyers who want one company to supply and install a complete door should look at Sunflex or Rinro.
Price: Not stated
Details: Glassworks Singapore
10. Atick Door Systems
Atick Door Systems supplies automatic and heavy sliding glass door systems. These are doors with sensors, motors and guides for openings that are too wide or too frequent to pull manually. In a home, that usually means a disabled-friendly entry, a wide balcony opening or a high-traffic internal link. The main benefit is hands-free operation. The main sacrifice is the requirement for power supply and regular servicing, which becomes another cost line.
What’s good
- Hands-free operation with sensors.
- Can carry heavy glass leaves.
- Good for frequent daily use or wheelchair access.
- Safety sensors can stop the door when a child or pet crosses.
What to watch
- Overkill for normal HDB rooms.
- Requires a power supply and regular servicing.
- Not usually the first choice for a design-led interior door.
Who it suits: Condo entrances, landed homes with wide openings and disabled-friendly design work. HDB flat owners who want a simple wardrobe or kitchen door should not pay for motorisation.
Price: Not stated
Details: Atick Door Systems
How to Choose a Sliding Door Without Getting Burnt
Sliding door installation Singapore is not a one-call job. The door leaf, track, wall support, floor level and the person who installs it all sit in separate boxes. A good supplier asks what is above the opening before quoting. A bad one gives a number over WhatsApp and disappears when the roller starts scraping.
The table below sets out the seven checks I use. Approval and renovation rules come first because HDB and condo restrictions are different. Track system suitability matters because a top-hung door hangs from the ceiling structure, while a bottom-roller door takes its weight on the floor. Glass and material safety is non-negotiable for partitions and balcony edges. Installation precision is what separates a door that glides from one that needs a hard pull. After-sales service covers the rollers and guides that wear out. Site coordination is the difference between a tidy opening and a messy gap at the tile. Cost transparency means the quote shows reinforcement, disposal and extra materials.
For the surrounding wall work, the HDB renovation category and the best renovation contractors in Singapore guide are good next steps.
| Criterion | Why it matters | What good looks like |
|---|---|---|
| Approval and renovation rules | HDB and condo projects have different restrictions on altering door openings, windows and common corridors. | The company asks about your project type and flags any approval or MCST requirements before starting work. |
| Track system suitability | Top-hung and bottom-roller systems handle different door weights, floor levelling and ceiling support conditions. | The supplier recommends a track type based on your door material, width and existing wall or ceiling structure. |
| Glass and material safety | Sliding door panels are often tempered or laminated. Wrong glass selection can create a serious safety risk. | The company specifies safety glass and can show you the relevant markings or certification for the panels. |
| Installation precision | A sliding door must be level and plumb. Poor installation causes scraping, sagging and early roller failure. | Installers use level tools, packers and proper anchor points, and test the door movement before they leave. |
| After-sales service | Sliding door rollers and floor guides wear out. You need someone who will come back to adjust and replace parts. | The company gives a clear warranty and responds to alignment or roller issues without long delays. |
| Site coordination | Sliding doors touch your floor tile, false ceiling, wall partition and sometimes surrounding cabinetry. | The team coordinates with your main contractor and tells you what must be built first. |
| Cost transparency | Hidden costs appear with steel reinforcement, old door disposal, glass cutting and extra materials. | The quote is itemised and the company explains site conditions that may raise the final price. |
Common Questions About Sliding Door Installation Singapore
Do I need HDB or MCST approval to change a sliding door in my flat?
For most internal replacements, no. You can change a wardrobe or bedroom door without HDB approval as long as you do not alter the structural opening, beam or external facade. Condo owners usually need to check the by-laws for balcony doors, especially if the sliding door forms part of the building facade. HDB flats have stricter rules when you widen a door opening or hack a wall, even a non-structural one. For those changes, you need a permit from HDB and sometimes a professional engineer’s endorsement. Always confirm before works because unauthorised hacking can delay renovation and trigger rectification. A good sliding door company will ask about your flat type at the start.
Sliding door versus bifold door for a condo bedroom, which one lasts longer?
A sliding door usually lasts longer than a bifold for a bedroom because it has fewer hinges and pivot points. Bifold doors fold along several panels, so each hinge and floor guide takes repeated stress. A top-hung sliding door with a quality roller set can run smoothly for years if the track is installed level. The best sliding door for a condo bedroom is often a single leaf sliding door, especially when the wall can take a top-hung track. Bifold doors also need more floor clearance and can drift out of alignment on uneven floors. If you want fewer moving parts and easier adjustment, choose a sliding door.
How much does it cost to replace an HDB aluminium sliding door?
Expect to pay between SGD 600 and SGD 1,800 for a standard HDB aluminium sliding door replacement in Singapore. The final cost depends on the number of panels, length of track, glass type and whether the old frame needs extra dismantling work. A simple two-panel bedroom door with standard aluminium sections sits at the lower end. A full balcony door with tempered glass and additional weather seals sits higher. Itemised quotes should separate materials, installation and disposal so you can compare suppliers fairly. If a cheap quote excludes measurement, waste disposal or safety glass marking, ask for a written breakdown before committing.
Can I buy a sliding door track from Taobao and ask a Singapore contractor to install it?
You can, but most carpenters and renovation firms will not guarantee the work. The track may not match Singapore wall and frame conditions, and spare parts can be hard to source later. Some contractors will install customer-supplied hardware on a time and materials basis, but they usually take no responsibility for premature roller failure. Singapore humidity and frequent use punish cheap alloy tracks, especially in rooms near the kitchen or balcony. If you already bought a track, show it to your contractor before any wall work. For a trouble-free install, buying hardware from a local supplier with replacement parts is usually safer.
Should I choose laminated or tempered glass for a sliding partition if I have young kids?
Laminated glass is the safer choice for a sliding partition in a home with young children. It holds together when broken, reducing the risk of large sharp pieces falling. Tempered glass is strong and breaks into small chunks, but those chunks can still scatter across the floor. For a partition at child height or near a play area, laminated glass gives you more time to react if a panel cracks. Some suppliers offer a combination of tempered and laminated glass for extra stiffness and safety. Ask for the glass markings and safety certification before the panel is cut.
Why does my sliding door become hard to move after a few months?
The usual cause is a track that has shifted out of alignment or collected dust and debris. Rollers can also wear unevenly if the door was not hung level in the first place. In Singapore, humidity and air-conditioning cycles cause timber doors and aluminium frames to expand and contract slightly, which changes the gap between the panel and the guide. Cleaning the track and adjusting the roller height often restores movement. If the door still sticks, the roller set may need replacement. Regular servicing should be part of the purchase decision, not an afterthought.
